HWAM 3055 Installation, Operating And Maintanance Instructions Download Page 19 | Manualshive

Page: 19 / 36

HWAM 3055 Installation, Operating And Maintanance Instructions Download Page 19

E & OE Instructions Part number IN1212 Ed D

19

©

EUROHEAT

DISTRIBUTORS (H.B.S) LTD. June 2011

Installation Instructions

For Wood Stoves

20/80

30/45

30/55

30/65

Serial Number

Part No.

Model Name

This Manual Must Always be Available to the Stove Operator

Since April 2002 only Registered Competent Engineers may install solid fuel fired

appliances without involving the Local Authority Building Control Department. For more

details contact HETAS.

Euroheat would suggest only Registered Competent Engineers such as HETAS approved

engineers install Euroheat appliances.

If a competent approved engineer is not employed to install your appliance your local

building control must be contacted and a building control number issued.

HETAS Ltd. Approval.

The Hwam 30/55 and Hwam 20/80 stoves have

been approved by HETAS Ltd. as intermittent

operating appliances for wood burning only.

«
...
17
18
19
20
21
...
»

Summary of Contents for 3055





































Reviews:

No comments