HW Group HWg-PWR 12, Manual

Page: 23 / 44

HWg-PWR 3 / 12 / 25 MANUAL HW group
September 2013 page 23
E-mail tab
The E-mail tab is used to define the e-mail server and the parameters for sending alarm e-
mails (beginning or end of an alarm). HWg-PWR only supports unencrypted SMTP connections.
Email Settings section

SMTP Server – IP address or domain name of your SMTP server.

SMTP port – Port number where the SMTP server listens. The default is 25.

Authentication – Enables authentication. Check this box if your SMTP server requires
authentication.

Username – Username for authentication to the SMTP server. If the Authentication
box is not checked, this field is irrelevant.

Password – Password for authentication to the SMTP server. If the Authentication box
is not checked, this field is irrelevant.

Importance – Sets the e-mail message priority. This is important for filtering and
further processing of alarm messages.

FROM – E-mail address of the sender, that is, the HWg-PWR unit. The address may be
necessary for the SMTP server and can be used to identify the HWg-PWR unit, or for
filtering and further processing of alarm messages.

Subject – E-mail subject. Contents of this field can be used to identify the HWg-PWR
unit, or for filtering and further processing of alarm messages.

TO – E-mail address of the recipient of alarm messages. Only one e-mail address can
be entered.

CC – E-mail address of the recipient of a copy of the alarm message. Only one e-mail
address can be entered.
The To and CC fields cannot accept distribution lists or multiple e-mail addresses. If you
need to send alarm messages to more recipients, ask your SMTP server administrator to
create a distribution list accessible through a single e-mail address.
Send Test Email section
After configuring Email Settings , use this button to send a test e-mail.