14
critical value of alarm setting.
--- Access to the stored data unit No. 8
---Measured resistance is 820 Ω
Note: "*" is limited to ETCR2000C.
VI
．
Quick Find Table
Function
Key
Boot Up / Shutdown / Shutdown Delay
POWER
Lock / Release Display
HOLD
*
Quit
POWER
*
Resistance measurement / current measurement / Data
Access model
MODE
*
Lock / Release Display / storage / Access To Alarm
Critical Value
SET
*
Alarm Critical Value Setting / Digital Option / Browse And
Store Data
MODE/SET
*
To clear all stored data
SET+MODE
Note: "*" is limited to ETCR2000C.
VII. Operating Method
1. Boot Up
Before booting up, the trigger should be pressed for a couple of times to
ensure the jaws are well closed.
Press
POWER
key, and it is switched into the boot-up state. First to
automatically test LCD display, all its symbols show up, see Figure 1. Then to
start the auto inspection; in this process, it will be followed by showing "
CAL6,
