Huyndai ATC32HCAN, Quick Reference Manual

Page: 138 / 234

6-20
Sending a text by using the voice
recognition
When you connect your mobile device to the system via
Bluetooth, contacts from the device are downloaded to the
system so you can text a message to a contact by using the voice
recognition.
A A
To call using voice recognition, there must be contacts stored
on the system.
A A It is available only when the UVO service is active.
1
Perform any of the following methods:
On the All Menus screen, touch Phone .
On the steering wheel, press the Call button.
2
On the bluetooth message screen, touch .
3
When a guiding beep is heard, say the message.
The system sends the text to the selected contact.
f Can text a message by using the voice recognition.
> See “Sending a text by using the voice recognition.”
g The list of menu items appears.
Message Settings : Displays the message settings
screen (if equipped).
Bluetooth Settings : Can change the Bluetooth
settings (if equipped).
Split Screen : Can turn on or off the split screen mode.
A A The auto-reply messaging may not be available depending on
the smartphone model.
A A
To edit or delete a message, pull over the vehicle at a
safe place and access the messaging function on your
smartphone. You cannot edit or delete a message from the
system.
A A
When an iPhone is connected to the system, there are some
restrictions when receiving messages as follows:
Only the sender name appears when the sender
information is saved.
When the sender information is not saved, only the phone
number appears.
You cannot use the auto-reply message function.
When the incoming message notification or lock-screen
view option is off, messages cannot be received.
A A The message reader function may not be supported
depending on the system language.