Huvitz HDR-7000, Service Manual

Page: 11 / 38

- 11 -
- Measure a model eye or a patient.
- Press PRINT button for transferring the measured data.
- Press MRK button with SHIFT pressed on the Operation Panel after the MRK or HRK finishes
printing.
- Select and load the data received.
- Check if the data is correct.
②
Checking with Lensmeter.
- Check the Option menu of CLM or HLM for the communication.
Set the RS232 option to LMTORK.
Set the BPS option to 9600.
- Measure a lens.
- Press PRINT button for transferring the measured data.
- Press CLM button with SHIFT pressed on the Operation Panel after the CLM or HLM finishes
printing.
- Select and load the data received.
- Check if the data is correct.
③
Checking with CCP-3100
- Check the System Settings menu of the Operation Panel for CCP-3100.
Set the Chart Connection option to SERIAL.
Set the Chart Device option to CCP-3100.
- Store the change by pressing the button EXE, SET or OK.
- Press some chart buttons and check the response of CCP-3100.
④
Checking with CDC-4000
-Check the System Settings menu of the Operation Panel for CDC-4000.
Set the Chart Connection option to SERIAL.
Set the Chart Device option to CDC-4000.
-Store the change by pressing the button EXE, SET or OK.
-Press some chart buttons and check the response of CDC-4000.
⑤
Checking with HDC-7000
-Check the System Settings menu of the Operation Panel for HDC-4000.
Set the Chart Connection option to SERIAL or IR.
Set the Chart Device option to HDC-7000.