Huvitz CCP-7000, Service Manual

Page: 8 / 31

8
2. When a horizontal line mask is used:
No upper and lower parts of the chart must be visible (when viewed from the correct position).
(Chart symbols must virtually align with the center of the mask.)
3. When a single isolation mask is used:
Only a single symbol must be visible with any other part of the chart staying invisible (when viewed from the
correct position).
(Chart symbol must virtually align with the center of the mask.)
4. When a red & green mask is used:
Boundary between the red and green parts of the mask must look straight with no tilt (when viewed from the
correct position).
3-2 Disassembly/Reassembly Producedures
3-2-1 NAME OF ILLUSTRATED PARTS
NO. NAME OF PART
1 STAND ASS’Y & BODY ASS’Y disassembly and assembly
2 BODY COVER(U) ASS’Y & FRONT COVER ASS’Y disassembly and assembly
3 PCB ASS’Y & POWER SOCKET ASS’Y disassembly and assembly
4 MECHA ASS’Y & BODY COVER(L) ASS’Y disassembly and assembly
5 MECHA ASS’Y disassembly and assembly
6 STAND ASS’Y disassembly and assembly
7 BODY COVER(L) ASS’Y & BUTTON ASS’Y disassembly and assembly
8 BODY COVER(U) ASS’Y disassembly and assembly
9 POWER SOCKET ASS’Y disassembly and assembly
10 MAIN PLATE ASS’Y disassembly and assembly
11 CHART ASS’Y disassembly and assembly
12 MASK ASS’Y disassembly and assembly