FULL HD-TVI(1080P)
VANDALPROOF & WATERPROOF
IR D&N DOME CAMERA
SK-V251IR(D)/HT21AI
MANUAL
1. Camera installation
(1) Fix the camera set with the supplied screws on ceiling or wall
mount. If you don't use supplied screws, the camera may fall off.
(2) Please refer to '3. Camera angle adjustment' regarding adjust
camera angle.
(3) Lens adjustment(Vari-focal Lens only)
After opening the LED cover,
① By turning the "Tele-Wide" knob,
you can access a range of focal
lengths within specified limits.
② Since then, by turning the "Near-
Far" knob, you can set the focus
toward the wanted object.
(4) Re-assemble the camera.
◐ HOW TO INSTALL
◐ DIMENSION
1. You can install the camera indoors or outdoors.
2. Choose an ideal location for the camera, since a camera unit must
be protected against vibration.
3. Be careful not to scratch the camera unit, especially lens or dome
cover.
4. Use the camera within the temperature(-45℃~50℃). [W/
HEATER(option)]
5. Avoid any direct sun light toward the lens.
6. Use the AC adaptor 12V DC, 1A regulated. Dual voltage product
can use 24V AC, 1A adaptor.(option)
◐ PRECAUTION
If the product is to be put out of operation definitively,
take it to a local recycling plant for a disposal which
is not harmful to the environment.
<Ceiling mount>
<Wall mount>
1
2
w
N
F
T
2. Pipe application
(1) Remove the screw for fixing a cable on the bottom of the base.
(2) Open the DOME COVER.
(3) Remove the TAP COVER and place the cables there.
(4) After distributing cables, use the TEPLON tape to wipe the pipe.
(5) Combine the pipe to the base.
<Caution> If you don't wipe TEFLON tape on pipe, it might cause
troubles on water-resistant.
3. Camera angle adjustment :
(1) Pan adjustment : Grasp the disk of camera and then adjust
direction to the right or left(-160°~190°)
(2) Tilt adjustment : Grasp the LED cover of camera and then adjust
direction to the up or down(6°~90°)
(3) Roll adjustment : Grasp the camera holder and then rotate
(-178°~178°)
<Caution> If you try to adjust the camera out of limited angle, it might
cause troubles and damage to camera.
1. 1/2.9" SONY CMOS sensor
2. Full HD(1920x1080) Resolution
3. DAY & NIGHT Function
4. WDR (Wide Dynamic Range) Function
5. 3D DNR Function
6. Privacy mask function 16 area
7. On Screen Display menu
8. Intelligent motion detection
9. Output : HD-TVI/CVBS
10. Protocol : PELCO-C
11. IP68(Waterproof)
12. Durable MATERIAL : Body - Aluminum, Dome - Polycarbonate
13. This camera is incredibly flexible to install with its 3-axis camera
construction, which makes the camera ceiling, wall or slope
mountable
14. 20M range visible in total darkness with 24pcs of IR LEDs.(Indoor)
15. Up to 500M Full HD-TVI Tranmission via Coaxial cable.(Maximum
tranmission distance may vary with type of coaxial cable)
◐ FEATURES
SCREW Tp1 4X25 3EA
MOUNT HOLE PLATE(STICKER)
Ø3.5
Ø30
SCREW Tp1 4X25 3EA
MOUNT HOLE PLATE(STICKER)
Ø3.5 Ø30
Put a sticker on the ceiling and make holes
according to the spots marked on a sticker
Put a sticker on the wall and make holes
according to the spots marked on a sticker
CABLE
PIPE
TEFLON TAPE
TAP COVER
CABLE FIXING SCREW
DOME COVER
LED COVER
DISK
ROTATION
U
D
R
L
CAMERA HOLDER
Ø100
Ø150.5
45
95.6
Ø129