4
CHANGES AND T YPING ERRORS RESERVED
CHANGES AND T YPING ERRORS RESERVED
a
ddiTioNal
safeTy
rUles
Always keep in mind that:
- the machine must be switched off and disconnected from the power supply during maintenance and repairs,
- clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap.
Do not remove safety devices or guards. Never use the machine while a guard is open.
Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
Always wear safety glasses.
1. a
ppliCaTioNs
This drill press is intended for drilling holes in ferrous and non-ferrous metals and woods. The machine has a light and
handy design and can be easily operated. The HU 13 laserdrill is widely used in machine works and repair shops.
2. m
aiN
speCifiCaTioNs
Specifications
Drill Capacity
32 mm
Rack & Pinion
Yes
Chuck Capacity
16 mm
Base Size
575*450 mm
Spindle Taper
MT3
Table Size
475*425 mm
Spindle travel
120 mm
Max. Distance Chuck to Table
595 mm
Column diameter
92 mm
Max. Distance Chuck to Base
1075 mm
Motor
400V/3ph/1100W
Voltage
400 V
Sewing
510 mm
Overall dimensions (L*M*H)
1727*760*475mm3
Overall Height
1710 mm
Weight
120 Kg
Range of spindle speeds: 12 speeds
Motor speed
Spindle Speeds (min
-1
)
1400 min
-1
120
200
250
360
450
950
950
1280 1520
1840
2240
3480
3. U
NpaCkiNG
aNd
CHeCkiNG
CoNTeNTs
1. Unpacking and checking contents
Separate all the parts from packaging materials and check each item make sure all items are accounted for before
discarding any packing material.
Item
Description
Qty
A
Table
1
B
Column Support Asm
1
C
Owner’s manual
1
D
Motor
1
E
Bag of loose parts
1
F
Base
1
G
Head Asm
1
H
Box of Loose parts
1
