Huvema HU 30 CROSS-4, Manual

Page: 2 / 22

WARNING:FAILURE TO FOLLOW THESE RULES
MAY RESULT IN SERIOUS PERSONAL INJURY
As with all machinery there are certain hazards involved with
operation and use of the machine. Using the machine with respect and
caution will considerably lessen the possibility of personal injury. However,
if normal safety precautions are overlooked or ignored, personal injury to
the operator may result.
This machine was designed for certain applications only. We strongly
recommends that this machine. NOT be modified and/or used for any
application other than for which it was designed. If you have any questions
relative to its application DO NOT use the machine until you have had
detail instruction form your dealer.
SAFTEY RULES FOR ALL TOOLS
1.FOR YOUR OWN SAFETY , READ THIS INSTRUCTION MANUAL
BEFORE OPERATING THE TOOL. Learn the tool’s application and
limitations as well as the specific hazards peculiar to it.
2.KEEP GUARDS IN PLACE and in working order.
3.GROUND ALL TOOLS. If tool is equipped with three-prong plug, it
should be plugged into a three-hole electrical receptacle. If an adapter is
used to accommodate a two-prong plug receptacle, the adapter lug must be
attached to a know ground . Never remove the thrid prong.
4.REMOVE ADJUSTING AND WRENCHES.
Form habit of checking to see that keys and adjusting wrenched are
removed form tool before turning it “on.”
5.KEEP WORK AREA CLEAN. Cluttered areas and benches invite
accidents.
6.DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power
tools in damp or wet locations, or expose them to rain. Keep work area
well-lighted.
7.KEEP CHILDER AND VISITORS AWAY. All children and visitors
should be keep a safe distance form work area.
8.MAKE WORKSHOP CHILDROOF-with padlocks, master switches, or
by removing starter keys.
9.Don’t force tool. It will do the job better and be safer at the rate for
which it was designed.