Huvema HU 20 SUPER, Manual

Page: 5 / 16

5
CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED
4. f
eaTUres
Model HU 20 Super HU 20F Super
Drilling capacity 20 mm 20 mm
Spindle taper MT2 MT2
Distance spindle column 180 mm 180 mm
Drilling depth 80 mm 80 mm
Speed range 210-2500 rpm (10) 210-2500 rpm (10)
Max. distance spindle-table 435 mm 770 mm
Column diameter 80 mm 80 mm
Table dimensions 280 x 280 mm 280 x 280 mm
Motor power 0.75 kW 0.75 kW
Weight 80 kg 92 kg
Voltage 400 V 400 V
5. i
nsTalling The machine
Install the machine on a concrete floor. Consider existing and anticipated needs, the size of material to be processed
through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location
for your machine. See figures below.
1-5
Site Considerations
Working Clearances
Consider existing and anticipated needs, size of material to be processed through each machine, and
space for auxiliary stands, work tables or other machinery when establishing a location for your
machine. See Figure 01 .
for the minimum working clearances of the Model JTD-16series
A 620mm B 390mm
1-6
Items Needed for Set Up
1.Column and Base
The column must be secured on the base toproperly assemble your drill press.
To secure the column to the base:
1. Place the column on the base and align themounting holes.
2. Secure the column to the base with the fourhex bolts, as shown in Figure 02
4
Figure 01
Figure 02
4.Slide the arbor into the spindle socket whileslowly rotating the drill chuck. The socket hasa
rectangular pocket where the tang (or flatportion of the arbor shown in Figure 21 ) fitsinto.
5.Seat the chuck with a rubber mallet, as shownin Figure 22.
1-8.
Setting the machine instruction
:
1. The machine base with setting hole will be set on concrete floor.
The outlined procedures of setting the machine
MODEL AREA SETTED SCREW
JTD-16 series X=800×600 M10
2
.
The dimension of setting hole:
JTD-16series
10
Figure 21 Figure 22
Wood
Tang-SideUp
HU 20 Super: X = 770x580 mm
Use M10 set screws
HU 20F Super: X = 800x650 mm
Use M12 set screws
Figure 3
Figure 2