6. Place the small corner table post into place with 2
inserts alinged to the holes on the seat rests and fix
into place with the 2 remaining 60mm bolts.
7. Place table section supported by the leg. Make sure it is
level and screw into place with 80mm screws from the
back of the trellis framing into the table.
8. At this point fit the trellis panels to go above the back
rests, fix into place using 70mm screws so the top of
the trellis frame is at the same level as the other trellis
panels.
9. At this point all the bolts can be fully tightened.
10. Place the top section with one long rail and one shorter
rail into place and screw into the top of the arbour
posts. (Use 2 x 70mm screws in each post). Next screw
the other top section into place. Your arbour should
now look like the picture opposite.
garden and landscaping products
H
H
UTTO
UTTO
N
N
Assembly Instructions
ACA
– Avon Corner Arbour
Hutton Garden and Landscaping Products
Church Lane, Northwood Green, Westbury-0n-Severn, Gloucestershire GL14 1ND
www.svw2000.co.uk/hutton
Tel: 01452 762089 Fax: 01452 760993 [email protected]