HUSTLER Super 104, Operator'S Manual, Page: 41 / 60

606835 4-9 REV B
When mounting blades, rotate them after installation to
ensure blade tips do not touch each other or sides of the
mower.
Seat Adjustment
This seat can be adjusted five different ways to obtain the
most comfortable position:
1. Back angle (Figure 4-18)
2. Forward and rearward travel (Figure 4-18)
3. Weight (Figure 4-18)
4. Isolator (Figure 4-18)
5. Armrest (Figure 4-19)
Steering Control Lever Adjustment
The steering control levers can be adjusted for operator
comfort.
A. To pivot the upper control levers forward or rearward,
loosen the cap screws that attach the upper control
lever to the lower lever. Then, pivot the upper control
lever. Tighten the cap screws. Figure 4-20
B. To lower and raise the steering control levers, remove
the cap screws. Slide the upper control lever up or
down and align the holes in it with the holes in lower
lever. Re-install the cap screws and tighten.
The steering control levers should be adjusted so that they
align with each other when in the neutral position.
A. Weight adjusting control
B. Forward/rearward travel
lever
C. Isolator
D. Back angle control
Figure 4-18
A
B
C
D
A. Armrest control
Figure 4-19
A. Upper control lever
B. Cap screws
C. Lower control lever
Figure 4-20
A
C
B
A