HUSTLER FasTrak 36 Manual Download Page 1

This manual applies to the following Hustler equipment lines:

FasTrak 36/42
FasTrak 44/52

To the new owner

The purpose of this manual is to assist owners and operators in

maintaining and operating the FasTrak tractor and deck.  Please read it
carefully; information and instructions furnished can help you achieve
years of dependable performance.

A separate Engine Owner’s Manual is included with your owner’s

packet which contains additional engine information that will not be
repeated in this manual.  You are urged to read it before attempting any
operation or repair of the engine.

The Quick Reference Decals are designed to give the operator brief

information needed in the daily operation and service of the machine.
These decals are not intended to be used in place of this manual but instead
is to be used as an extension of this manual.  These decals should not be
removed or obliterated.  Replace these decals if they become unreadable.   

It is the 

owner’s responsibility 

to make certain that the operator reads

and understands this manual and all decals before operating this machine.
It is also the 

owner’s responsibility

to make certain that the operator is a

qualified and physically able individual, properly trained in the operation of
this equipment.  Local regulations may restrict the age of the operator.

IMPORTANT:

For more detailed maintenance and adjustment

information refer to the proper parts manual  for your machine.  Refer to
the Product Literature section of this manual for ordering information.

Using this manual

General operation, adjustment and maintenance guidance is outlined for

both the experienced and novice Hustler user.  Operating conditions vary
considerably and cannot all be addressed individually.  Through
experience, however, operators should find no difficulty in developing
good operating skills suitable to most conditions.

Directions used in this manual, for example RIGHT or LEFT, refer to

directions when seated on tractor facing forward, unless otherwise stated.

Photographs and illustrations used were current at the time of printing,

but subsequent production changes may cause your machine to vary
slightly in detail.  Hustler Turf Equipment reserves the right to redesign and
change the machine as deemed necessary, without notification.  If a change
has been made to your machine which is not reflected in this owner’s
manual, or the parts manual, see your Hustler dealer for current information
and parts.

Warranty registration

The Delivery and Warranty Registration form must be completed and

signed to validate your warranty protection.  As the new equipment owner,
you are expected to see that the form is completed and forwarded to Hustler
Turf Equipment at time of delivery.

Be sure to register the tractor plus each attachment that displays a model

and serial identification number plate with Hustler Turf Equipment.

IMPORTANT:

Any unauthorized modification, alteration, or use of

non-approved attachments voids the warranty and releases Hustler Turf
Equipment from any liability arising from subsequent use of this
equipment. 

Model and serial number

Tractor model and serial numbers are found on the serial identification

plate, located on the frame directly below and to the left of the operator’s
platform.

These numbers are required on the Warranty Registration form.  They

will also assure you of the correct service parts when replacement becomes
necessary.

Parts and service

Use original Hustler replacement parts only.  These parts are available

through your local Hustler dealer.  To obtain prompt, efficient service,
always provide the following information when ordering parts:

1.

Correct part description

2.

Correct model number.

3.

Correct serial number.

All warranty repair and service must be handled through an authorized

Hustler dealer.  Arrangements should be made through your local service
center.

GENERAL INFORMATION

600643  02/06

1

IMPORTANT: 

This engine is not equipped with a spark arrester muffler.  It is a violation of California Public Resource Code Section 4442 to use or

operate this engine on any forest-covered, brush-covered, or grass-covered land.  Other states or federal areas may have similar laws.

This spark ignition system complies with Canadian ICES-002.

The enclosed Engine Owner’s Manual is supplied for information regarding the U.S. Enviromental Protection Agency (EPA) and the California
Emission Control Regulation of emission systems, maintenance and warranty.

Keep this Engine Owner’s Manual with your unit.  Should the Engine Owner’s Manual become damaged or illegible, replace immediately.
Replacements may be ordered per the information found in the Product Information section of this manual.

The engine exhaust from this product

contains chemicals known to the State

of California to cause cancer, birth

defects or other reproductive harm.

WARNING:

Summary of Contents for FasTrak 36

































Reviews: