121697
REV. A
2
ASSEMBLY:
1.
Park the mower on a solid, level surface; set the park brakes; shut-off the engine; and
remove the ignition key.
2.
Remove the existing hardware as shown in FIG. 1.
3.
Attach the engine guard to the rear of the mower frame using the hardware provided,
as shown in FIG. 1. The right and left sides are similar.
NOTE:
Make sure the engine guard does not make contact or interfere with the engine air
cleaner.
FIG. 1
Engine guard
NT .375-16
(flanged)
Existing
hardware
CS .375-16 X .75
Existing hardware