#OSO-29 #OSO-34 R.1 November 2020
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
ASSEMBLY AND INSTALLATION
13
2.5 Front Trim Removal and Installation
This appliance has optional shrouds. Contact your local dealer for
more information.
1. With one hand on the front trim to prevent it from falling,
remove the screws from the two sides of the trim (Figure 2.2).
Save screws.
2. Carefully lift the front trim up and away from the appliance
(Figure 2.2). Place it face down on a soft, non-abrasive surface.
3. To reinstall, align the attachment hooks on the back of the front
trim with slots on the appliance. Raise the front trim slightly into
the slots and allow the attachment hooks to lower into position.
Hold trim and secure with (2) screws previously removed.
Figure 2.2, Front Trim Installation and Removal
