8
Installation (cont’d)
Leveler Adjustment
Position the case at the highest point. Set a long
magnetized level (4ft [1220 mm] or more) on
either underneath the deck or on top of the case.
Ensure to level case from front to back and side
to side.
Level
(4 ft[1220mm])
Leg Adjustment
Adjust the legs at each corner of the case to
level out any discrepancies in order to optimize
case performance and proper drainage.
Note: To avoid removing concrete flooring, begin
line up levelling from the Highest point of the
store floor.
A wrench or pliers may be used to adjust each
base leg.
• Turning the base of each leg clockwise will
raise the height of the case.
• Turning the base of each leg
counterclockwise will lower the height of the
case.
Level
(4 ft[1220mm])
