29
3
c. The number and location of nozzles: Each fogger nozzle will mist a 3’ or 4’ section of the
case. The nozzles will be mounted in the close-offs for the crumb tray under the rear
discharge air grills.
Case
Length
Number of
Heated Nozzles
Location
(see drawing below)
4
1
1
6
2
2, 3
8
2
2, 3
12
3
2, 3, 5
Figure 7: Remove indicated screws and remove
close off and mount nozzles.
d. The nozzle locations are described in the figure below. The number in the bubbles
indicate the nozzle location for various case sizes. See the table above for case length vs
nozzle locations.
Figure 6: Pre-installed brackets shown with
nozzles installed. The required bracketry will
be factory installed.
Figure 5: The close off with nozzle
brackets.
