P/N 3110586_A
4-1
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
ISMGG2DAA Merchandisers
CARE AND CLEANING
Long life and satisfactory performance of
any equipment is dependent upon the care it
receives. To ensure long life, proper sanitation
and minimum maintenance costs, these
merchandisers should be thoroughly cleaned,
all debris removed and the interiors washed
down, weekly.
Exterior Surfaces
The exterior surfaces must be cleaned with a
mild detergent and warm water to protect and
maintain their attractive finish.
n
ever
use
AbrAsive
cleAnsers
or
scouring
pAds
.
Interior Surfaces
The interior surfaces may be cleaned with most
domestic detergents, ammonia based cleaners
and sanitizing solutions with no harm to the
surface. Self contained models empty into a
limited capacity evaporation pan, which will
overflow if excess water is used in cleaning.
DO NOT Use:
Abrasive cleansers and scouring pads, as these
will mar the finish or coarse paper towels on
coated glass. DO NOT use ammonia-based
cleaners on acrylic parts.
Solvent, oil or acidic based cleaners on any
interior surfaces. Do not use high pressure
water hoses.
DO NOT flood merchandiser with water.
n
ever
introduce
wAter
fAster
thAn
the
wAste
outlet
cAn
remove
it
.
Self contained
models empty into an evaporation pan that will
overflow if too much water is introduced during
cleaning.
Do Use:
Remove the product and all loose debris to
avoid clogging the waste outlet. Store product
in a refrigerated area such as a cooler. Remove
only as much product as can be taken to the
cooler in a timely manner.
Disconnect electrical
power before cleaning.
Thoroughly clean all surfaces with soap and
hot water.
d
o
not
use
steAm
or
high
wAter
pressure
hoses
to
wAsh
the
interior
.
t
hese
will
destroy
the
merchandisers
’
sealing
causing
leaks
and
poor
performance
.
Take care to minimize direct contact between fan
motors and cleaning or rinse water.
Allow merchandisers to dry before resuming
operation. After cleaning is completed, turn on
power to the merchandiser.
MAINTENANCE
To reduce the risk of fire, electrical shock or
injury when cleaning this merchandiser:
• Unplug the merchandiser before cleaning;
• Keep all liquids away from electrical and
electronic components;
• Do not use any mechanical device or other
means to speed the defrost process, except
as recommended by the manufacturer.
Do NOT use HOT water on Cold glass Surfaces.
This can cause the glass to shatter and could
result in personal injury. Allow glass fronts, to
warm before applying hot water.
