Hussmann impact Excel C2X-LGE Technical Data Sheet Download Page 8

Page: 8 / 8

C2-XLGE

Technical Data Sheet

HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.

8 of 8

Impact

C2-XLGE

Dairy / Delicatessen
Precut & Packaged Produce

Screws

Ballast

Foil-covered
Anti-sweat
Heater

Canopy

Anti-Sweat Heater Wires
with Purple Markers

Electrical
Wireway

CANOPY AND SHELF LAMP BALLAST

The ballast for the canopy and shelf lamps is
located behind the canopy on the left-hand end
(when facing case) of the merchandiser.

To access the ballast:
1. Remove screws at bottom edge of canopy and

rear of top panel.

2. Remove the canopy by pulling it forward.

3. Remove the top panel by lifting it up.

4. Service or replace ballasts as required.

5. Reassemble items as they were originally

installed.

NOTE

: Rail lamp ballast is located behind the

lower front panel.

CANOPY ANTI-SWEAT HEATER

The canopy anti-sweat heater location is shown
below. Connections are in the electrical wireway.

Summary of Contents for impact Excel C2X-LGE









Search results

Summary of Contents for impact Excel C2X-LGE

Reviews:

Related manuals for impact Excel C2X-LGE

Brands by name

Popular brands

Hussmann impact Excel C2X-LGE, Technical Data Sheet

Search results

Summary of Contents for impact Excel C2X-LGE

Reviews:

Related manuals for impact Excel C2X-LGE

Brands by name

Popular brands