8 of 8
C2SLE Data Sheet Set
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
R e m o v e
S c r e w s
Remove
Screws
B a l l a s t
C a n o p y T o p P a n e l
The ballast for the canopy and shelf lamps is
located behind the canopy on the left-hand end of
the merchandiser (when facing case).
To access the ballast:
1. Remove screws at bottom edge of the canopy
and rear of the top panel.
3. Remove the one piece canopy top panel by
moving panel forward slightly to clear flange
in front, then lifting up.
4. Service or replace ballast as required.
5. Reassemble items as they were originally
installed.
NOTE
: Rail lamp ballast is located behind the
lower front panel.
REPLACING CANOPY AND SHELF LAMP BALLAST