PRODUCT INSTALLATION MANUAL
DM13 FRONT OPEN MULTIDECK
_________________________________________________________________________________________________________________________
Page 9
Hussmann
Joining the Cases
Ensure cases are sealed before joining them to other cases
For instructions on attaching case ends, refer to appendix 4: attaching case ends
CAUTION
Do not walk or sit on cases.
To join the cases
1. Draw up the required case tightly against the case already in position
CAUTION
Case joining bolts should only be used,
with care, at the final pulling-up stage.
2. Ensure that the case is level, from front to back and side to side, with the existing case.
3. Insert the joining bolts, found in the blister pack, into the end holes and tighten
– see Fig (9): joining hole locations
Fig (9) Joining holes location
Joining Holes
