5-2
s
ErvIcE
P/N 0515957_M
U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900 • www.hussmann.com
REPLACING ELECTRONIC BALLASTS
OR LED POWER SUPPLIES
The canopy ballast or LED power supply is
located in the electrical box on top of the
merchandiser.
To gain access:
1.
d
isconnect
the
electricAl
power
to
the
merchAndiser
.
2. Remove top panel by removing the screws
on top of the case.
3. The ballast is located under the top sign.
REPLACING FLUORESCENT LAMPS
OR LED FIXTURES
The lamp is removed as shown in the image
below. The lamp twists out of its end cap.
The lamp can be replaced without removing the
top panel.
Fluorescent lamps contain mercury vapor.
Mercury exposure at high levels can harm
the brain, heart, kidneys, lungs, and immune
system of people of all ages. Do not break
or puncture fluorescent lamps. Dispose of,
or store, all fluorescent lamps in accordance
with Federal (40 CFR 273), State, and local
hazardous waste requirements. Refer to
http://www.epa.gov/mercury/about.htm
Fluorescent Lamp
