4
ALIGN CASES
/
TIGHTEN
JOINING POINTS
Lift end merchandiser to position
and align with D5XLEP parent
merchandisers, mating alignment
pins with corresponding holes.
Carefully lift merchandiser in
position. Do not pull or push
merchandiser. Pulling or pushing
case may damage adjustable legs.
Insert
Front Rail Alignment Rod
(Item 4)
(
1
/
4
in. diameter x 6 in.) to
bottom alignment rod recess in
lower front rails of parent cases and
push alignment rod through recess
in end case rails. Each end
merchandiser gets one alignment
rod in lower front rail as shown in
Detail A.
NOTE
:
FRONT RAIL CONFIGURATION
IS DIFFERENT FOR OPTIONAL RAIL
LIGHTS
.
Level end merchandiser, and shim
as necessary.
Insert
5
1
/
2
in. Cap Screws (Item 5)
through
118° Joining Bracket
(Item 6)
,
Neoprene Washer (Item 7)
and D5XLEP cases. Pass cap screws
through D5XELE and insert neo-
prene washer,
Metal Washer (Item
8)
,
Lock Washer (Item 9)
and
Hex
Nut (Item 10)
as shown in
Detail B.
Loosely tighten screws until cases
touch.
P/N 0508902_A
5
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
D5XEE & D5XELE to D5X Lineup
Joining Instructions
D5XLEP CASE PARENT
A
A
B
B
All Joining Points
DETAIL A
DETAIL B
Alignment Rod
Alignment Rod
Alignment
Rod
Bolt
Metal
Bracket
Neoprene Washer
Lock
Washer
Nut
Neoprene Washer
Metal
Washer
Line Up
Case
End
Frame
End
Case
Foam
Bottom
Align Cases / Tighten Joining Points