5
Never stand on the Mobile Produce Case deck for
any reason.
These surfaces are not steps and are not
designed to support such loads.
Doing so will result in:
•Damage to case
•Serious injury to user
Moving Mobile Produce Case
Refer to illustration below, all casters must be switched to
the unlocked position before transporting the merchan-
diser. Ensure to check all six caster located at the corners
and center of the front and rear at the perimeter of the
merchandiser are unlocked to properly transport.
Installation
Location
The Mobile Produce Case display has been designed for
use only in air conditioned stores where temperature and
humidity are maintained either 75°F ambient and 55% RH.
When selecting the location for placement of this
case, avoid the following conditions:
Excessive air movement
• Doors
• Air-conditioned vents
• Other air sources
Excessive heat
• Windows
• Sun
• Flood lamps 8 feet or less from the product
• Other heat sources
Skid Removal
Unstrap case from skid and roll case off to move near plac-
ing location
Note:
Cases are manufactured and shipped to stores with
casters installed on the base frame to make the job of
moving cases easier for everyone involved with the
manufacturing, shipping and installation process.
Casters not only speed up the process, but they also
reduce the chance of damage from raising and lowering
cases with ”J” bars to place them on dollies, skates or roll-
ers. In most situations, one or two persons can move the
case with ease.
A
UNLOCK BUTTERFLY TAB ON CASTER
Summary of Contents for Chino MPC-ET Series
Page 16: ...16 Safenet III Operation ...
