2 Preparations
Connect Foot Control and Power
Supply
C
A B
Among the accessories you will find the power cord and the
foot control.
Foot control to use with this machine:
C-9000, manufactured by: CHIEN HUNG
Connect the foot control cord to the front socket on the
bottom right side of the machine (A).
Connect the power cord to the rear socket on the bottom
right side of the machine (B). Plug the cord into the wall
socket.
Before plugging your machine in, make sure the voltage is
the same as indicated on the plate under the machine.
Specifications vary from country to country.
Press the ON/OFF switch to ON to turn on power and light
(C).
Note: When the front cover is open the safety switch is activated and
prevents the machine from sewing, even if the foot control is pressed.
Note: Your machine is adjusted to provide the best stitch result at
normal room temperature. Extreme hot and cold temperatures can affect
the sewn result.
Before Using Your Machine for the
First Time
Before using your machine for the first time, place a scrap of
fabric under the presser foot and run the machine without
thread for a few minutes. Wipe away any oil which may
appear.
9
