12 SERVICE WORK ON THE CHASSIS
59
B00486-10
Main work
–
Remove screws
. Pull out inner tube
.
–
Remove the glass fiber yarn filling
from the inner tube.
–
Clean the parts that need to be reinstalled and check for damage.
–
Fit the new glass fiber yarn filling
into the inner tube.
–
Slide outer tube
over the inner tube with the new glass fiber yarn filling.
–
Mount and tighten all screws
.
Guideline
Screws on the main silencer
M5
7 Nm (5.2 lbf ft)
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
12.29
Removing the right side cover
V00408-10
–
Remove screw
.
–
Pull off the side cover sideways in areas
and
, and remove toward the
front.
12.30
Installing the right side cover
V00409-10
–
Position the side cover on collar bushings
and
, and push toward the rear.
–
Engage the side cover in areas
and
.
–
Mount and tighten screw
.
Guideline
Remaining screws, chassis
M5
5 Nm (3.7 lbf ft)
