Husqvarna TE 150 2023, Owner'S Manual

Page: 77 / 168

SERVICE WORK ON THE CHASSIS 12
75
Main work
–
Check the throttle cable routing. ( p. 81)
H03706-11
–
Position the fuel tank and fit the two spoilers to the sides in
front of the radiator bracket.
–
Make sure that no cables or throttle cables are trapped or
damaged.
H03704-11
–
Attach the fuel tank breather hose.
–
Mount and tighten screw
1
with the rubber bushing.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
(TE 150 EU)
–
Position the horn with the horn bracket.
H03705-11
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
H03702-11
–
Plug in connector
3
for the fuel pump.
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray ( p. 156)
–
Join quick release coupling
4
.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
–
Attach the fuel tank breather hose.
Finishing work
–
Install the right side cover. ( p. 72)
–
Mount the seat. ( p. 67)