Husqvarna TC 50 2023 Owner'S Manual Download

Page: 95 / 196

WHEELS, TIRES 13

13.1

Removing the front wheel

Preparatory work

–

Raise the motorcycle with a lift stand. (

p. 42)

A00086-10

Main work

–

Remove screw

–

Loosen screws

A00087-10

Warning

Danger of accidents

Damaged brake discs reduce

the braking effect.

–

Always lay the wheel down in such a way that the

brake disc is not damaged.

–

Hold the front wheel and remove the wheel spindle. Take the

front wheel out of the fork.

Info

Do not actuate the hand brake lever when the front

wheel is removed.

H00934-10

–

Remove spacers

13.2

Installing the front wheel

Warning

Danger of accidents

Oil or grease on the brake discs reduces the braking effect.

–

Always keep the brake discs free of oil and grease.

–

Clean the brake discs with brake cleaner when necessary.

Summary of Contents for TC 50 2023





































































































































































































Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands

Husqvarna TC 50 2023, Owner'S Manual

Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands