Husqvarna TC 50 2023, Owner'S Manual

Page: 39 / 196

TUNING THE CHASSIS 10
37
Finishing work
–
Install the shock absorber. ( p. 61)
–
Remove the motorcycle from the lift stand. ( p. 42)
10.11 Adjusting the riding sag
Preparatory work
(TC 50)
–
Raise the motorcycle with a lift stand. ( p. 42)
(TC 50 MINI)
–
Raise the motorcycle with a lift stand. ( p. 42)
–
Remove the rear wheel. ( p. 94)
–
Remove the shock absorber. ( p. 60)
–
After removing the shock absorber, clean it thoroughly.
B00292-10
Main work
–
Choose and mount a suitable spring.
Guideline
Spring rate (TC 50)
Weight of rider: 15 …
25 kg (33 … 55 lb.)
25 N/mm (143 lb/in)
Weight of rider (stan-
dard): 25 … 35 kg (55 …
77 lb.)
30 N/mm (171 lb/in)
Weight of rider: 35 …
45 kg (77 … 99 lb.)
35 N/mm (200 lb/in)
Spring rate (TC 50 MINI)
Weight of rider: 15 …
25 kg (33 … 55 lb.)
65 N/mm (371 lb/in)
Weight of rider (stan-
dard): 25 … 35 kg (55 …
77 lb.)
75 N/mm (428 lb/in)
Weight of rider: 35 …
45 kg (77 … 99 lb.)
85 N/mm (485 lb/in)
Info
The spring rate is shown on the outside of the spring.
Smaller weight differences can be compensated by
changing the spring preload.
Finishing work
–
Install the shock absorber. ( p. 61)
–
Remove the motorcycle from the lift stand. ( p. 42)
–
Check the static sag of the shock absorber. ( p. 34)
–
Check the riding sag of the shock absorber. ( p. 35)
–
Adjust the rebound damping of the shock absorber. ( p. 32)