manualshive.com logo in svg

Husqvarna T540i XP, Operator'S Manual, Page: 13 / 32

Share
Download
Husqvarna T540i XP Operator'S Manual Download Page 13

3. Push the air intake cover to the left until the holes

align.

4. Install the screw.

Operation

Introduction

WARNING: 

Read and understand the

safety chapter before you use the product.

Husqvarna Connect

Husqvarna Connect is a free app for your mobile

device. The Husqvarna Connect app gives extended

functions for your Husqvarna product.
• Extended product information.
• Information about, and help with, product parts and

servicing.

Bluetooth

®

 wireless technology

Products with built-in Bluetooth

®

 wireless technology

can connect to mobile devices and enables additional

functions from connect.
The symbol for 

Bluetooth

®

 wireless technology comes

on when your mobile device is connected to the

product.

To start to use Husqvarna Connect

1. Download the Husqvarna Connect app on your

mobile device.

2. Register in the Husqvarna Connect app.
3. Follow the instruction steps in the Husqvarna

Connect app to connect and register the product.

Note: 

Husqvarna Connect app is not available for

download in all markets.

To do a function check before you use

the product

1. Do a check of the chain brake to make sure that it

operates correctly and that it is not damaged.

2. Do a check of the power trigger lockout to make

sure that it operates correctly and that it is not

damaged.

3. Do a check of the keypad to make sure that it

operates correctly.

4. Make sure that there is no oil on the handles.
5. Do a check to make sure that all parts are correctly

attached and not damaged or missing.

6. Do a check of the chain catcher to make sure that it

is attached correctly.

7. Do a check of the chain tension.
8. Charge the battery and make sure that it is

correctly attached to the product.

9. Make sure that the saw chain stops when you

release the power trigger.

7

1

3

9

2

4

8

5

6

1036 - 005 - 29.06.2020

13

Summary of Contents for T540i XP

































Reviews:

No comments