background image

- 5 -

Never place hands or body 

part between a log and any 

part of the log splitter.
Hold logs on sides when 

loading. Keep hands and feet 

away from cylinder, wedge, 

and partially split logs.
Do not split logs against the 

grain. Split logs end to end in 

the direction of the grain only.

Keep sparks, flame and 

smoking materials away.

To prevent serious injury 

or death from escaping 

hydraulic fluid, ALWAYS keep 

body and hands away from 

pin holes or nozzles that 

eject hydraulic fluid under 

pressure.
Escaping hydraulic fluid can 

puncture skin and cause 

blood poisoning.

Do not overfill fuel tank.
Replace fuel cap securely 

and clean up spilled fuel
Never fill fuel tank when 

engine is running, hot or unit 

is indoors.

SAFETY

  WARNING!  THIS SPLITTING 

MACHINE IS CAPABLE OF CRUSHING 
OR AMPUTATING BODY PARTS. 
FAILURE TO OBSERVE THE SAFETY 
INSTRUCTIONS IN THE MANUALS 
AND ON DECALS COULD RESULT IN 
SERIOUS INJURY OR DEATH.

Before Operating

•  Read, understand, and follow all 

instructions on the machine and in the 
manual.

•  Understand how to operate all controls, 

the functions of all controls, and how to 
STOP in an emergency.

•  Read these safety rules and follow them 

closely. Failure to follow these rules 
could lead to loss of control of unit, 
severe personal injury or death to you or 
bystanders or result in damage to property 
or the machine.

•  Make sure all assembly has been properly 

completed.

•  Understand all safety instructions provided 

in the manual.

•  Review control functions and operation of 

the unit. Do not operate the unit unless all 
controls function as described.

•  Review recommended lubrication, 

maintenance and adjustments.

•  Inspect unit before each use for: missing 

or damaged decals and shields. Replace 
or repair as needed.

General Operation

•  The user is responsible for preventing 

accidents or injuries occurring to 
themselves, other people or property.

•  Do not allow anyone to operate the log 

splitter who has not read the operator 
manual or has not been instructed on the 
safe use of the splitter.

•  Do not use log splitter for any purpose 

other than splitting logs.

•  Keep children, people, and pets away. Be 

alert and shut the unit off if anyone enters 
work area. Keep children under watchful 
care of a responsible adult.

•  Never allow children or untrained adults to 

operate this machine.

•  Never allow anyone to ride on the 

machine.

•  Never transport cargo on the log splitter.
•  Never operate the machine when under 

the influence of alcohol, drugs, or 
medication.

•  Never leave the machine unattended with 

the power source operating.

•  Never operate the machine when under 

the influence of alcohol, drugs, or 
medication.

Summary of Contents for S427

























Reviews: