Control panel
Status
Step
The tool is unknown.
Speak to a Husqvarna
service agent.
The tool is unknown.
Speak to a Husqvarna
service agent.
The machine stop button is
pushed down.
The product is in sleep
mode.
Do a reset of the product.
Make sure that the ma-
chine stop button is re-
leased.
Incorrect situation.
1. Restart the product
2. If the product does not
start, speak to a Husq-
varna service agent.
Ground fault.
1. Change tool and restart
the product
2. If the product does not
start, speak to a Husq-
varna service agent.
There is a hardware fault.
There is a fault in the con-
nected tool.
No power because the
product is too hot.
Let the product and the
connected power tool cool
down.
Warning: The product can
be too hot (1-phase).
Do a check of the cooling
water. Decrease the load.
Warning: The product can
be too hot (3-phase).
Do a check of the cooling
water. Decrease the load.
12
1244 - 002 - 18.05.2020
Summary of Contents for PP 70
