8 –
English
ASSEMBLY
Fit the handle
•
Remove the screws (A).
•
Remove the locking knobs (B).
•
Fit the handle in the handle stand-off on the machine.
•
Refit screws (A) and locking knobs (B).
•
The locking knobs should be positioned in-line with the
handlebar to reduce the risk of damaging the knobs when
laying down the machinge when changing tools.
Changing the diamonds
Shut down the machine and disconnect the power plug.
Have a set of gloves ready, as diamond tools can get very hot.
•
Crank up the handlebar to the highest position.
•
Pull back on handle to lift grinding head off the ground.
•
Lay machine back on the ground.
•
Put on gloves.
•
Use a hammer to remove the diamond segments.
•
Affix new diamond segments on the grinding disc.
•
Once new diamond segments have been attached,
reverse procedure to lower machine to ground.
