6.2 Grinding head
6.2.1 To remove the grinding head
To remove the tool holder assembly, use an internal
puller and an extension. Refer to
overview on page 7.
1. Remove the screw that attaches the holder
assembly to the motor shaft, with an impact wrench .
2. Put the internal puller claws (A) on the inner edges
of the center hole of the holder. Put the extension
(B) on the motor shaft (C).
A
B
C
3. Remove the tool holder assembly from the motor
shaft slowly to prevent damage to the vibration
damping units.
4. Remove the tool holder assembly.
12 - Repair and servicing
1022 - 002 -
