Husqvarna Norden 901 2022, Owner'S Manual

Page: 110 / 170

15 WHEELS, TIRES
108
V02401-10
–
Position both brake calipers.
The brake linings are correctly positioned.
–
Mount screws
5
on both sides but do not tighten yet.
Guideline
Screw, front
brake caliper M10x1.25 45 Nm (33.2 lbf ft)
Loctite
®
243™
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point. Secure the hand brake lever in the activated position.
The brake calipers straighten.
–
Tighten screws
5
on both sides.
Guideline
Screw, front
brake caliper M10x1.25 45 Nm (33.2 lbf ft)
Loctite ® 243™
–
Position wheel speed sensor
6
in the hole.
–
Mount and tighten screw
7
.
Guideline
Screw, front wheel
speed sensor M6 10 Nm (7.4 lbf ft)
–
Remove the locking piece of the hand brake lever.
–
Take the motorcycle off the front lifting gear. ( p. 80)
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 79)
V02398-11
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
Tighten screws
8
.
Guideline
Screw, fork stub M8 15 Nm (11.1 lbf ft)
15.3 Removing the rear wheel
Preparatory work
–
Raise the motorcycle with the rear lifting gear. ( p. 79)