• If defects are found or if you are not sure that
the product is safe to use, take the product out of
service. Refer to
To take the product out of service
on page 9
.
To do a product inspection after each
use
• Examine the product for abrasion and cuts.
• Make sure that the product label is clearly visible and
easy to read.
• If defects are found or if you are not sure that
the product is safe to use, take the product out of
service. Refer to
To take the product out of service
on page 9
.
To do a product inspection each 12
months
WARNING:
This product inspection
must only be done by a competent person
or the manufacturer.
The product inspection must be documented. Refer
Product inspection record sheet on page 8
and
Written inspection record sheet on page 8
.
• Do a check of the general product condition:
a) Do a check of the product age.
b) Do a check of the completeness of the product.
c) Make sure that the product is not dirty.
d) Make sure that the product is correctly
assembled.
• Examine the product label:
a) Make sure that the product label is clearly visible
and easy to read.
b) Make sure that the product label has a CE
marking and specifies the year and month of
manufacture.
• Examine all individual parts for these types of
mechanical damage:
a) Cuts and cracks
b) Indentations
c) Fibrillation and abrasion of fiber parts
d) Formation of ribs
e) Kinks
f) Crush damages
• Examine all individual parts for thermal or chemical
damages, such as fusing or hardening.
• Make sure that there is no discoloration of the
product.
• Examine all metal components for corrosion and
deformations.
• Do a check of the condition and completeness of the
end connections:
a) Make sure that there are no damages to the
stitching, such as abrasion of the sewing thread.
b) Make sure that there is no slippage of the
splices.
c) Examine the knots.
After the product inspection, mark the product with the
date of inspection or with the next date for inspection.
Product inspection record sheet
(Fig. 1)
1. Manufacturer: Husqvarna AB, SE-561 82
Huskvarna, Sweden, tel: +46-36-146500
2. Model
3. Retailer
4. Batch number
5. Serial number
6. Name of user
7. Date of production
8. Purchase date
9. Date of first use
10. Date of retirement
11. Compatible components within harness based work
at height systems
12. Comments
Written inspection record sheet
(Fig. 2)
1. Date
2. Inspection type: Pre-use check, Weekly inspection,
Thorough inspection or Exceptional circumstances
3. Findings and actions: defects, repairs, etc.
4. Accept, Reject or Correct
5. Next inspection date
6. Name and signature of competent person
Maintenance
To repair the product
• Only let the manufacturer do repairs.
To clean the product
1. Clean the product with warm water and a rope
detergent. Obey the instructions on the package of
the rope detergent.
8
1781 - 003 - 13.06.2022
Summary of Contents for Multi Sling
Page 3: ...3 4 5 A C B 6 7 8 B C A 9 10 ...
Page 139: ...1781 003 13 06 2022 139 ...
