Automatic shutdown function
The product is equipped with a shutdown
function that deactivates the product if it is not
used.
To use the correct chain oil
WARNING:
Do not use waste
oil, which can cause injury to you
and the environment. Waste oil also
causes damage to the oil pump, the
guide bar and the saw chain.
WARNING:
The saw chain can
break if the lubrication of the cutting
equipment is not sufficient. Risk
of serious injury or death to the
operator.
WARNING:
Use the correct
chain oil for this function to operate
correctly. Speak to your servicing
dealer when you select your chain
oil.
Note:
This product has an automatic chain
lubrication system. You can also adjust the oil
flow. Refer to
To adjust the chain lubrication
on page 25.
• Use only Husqvarna dielectric chain oil.
CAUTION:
In temperatures
below 0°C/32°F some chain oils
become too thick, which can
cause damage to the oil pump
components.
• Use the recommended cutting equipment.
Refer to
on page 28.
To use the product
• Hold the product as close to your body
as possible to get the best balance. Use
the harness to support the weight of the
machine and make it easier to handle.
• Make sure that the tip does not touch the
ground.
• Do not rush the work, but work steadily
until all the branches have been cut back
cleanly.
• Always work at full throttle.
• Whenever possible position yourself so
that you can make the cut at right angles to
the branch.
• Do not work with the shaft held straight
out in front of you as this increases the
apparent weight of the cutting attachment.
• Cut large branches in sections so that you
have better control over where they fall.
• Never cut through the swelling at the root
of the branch as this will slow down healing
and increase the risk of fungal attack.
1744 - 004 - 22.03.2022
17
Summary of Contents for MADSAW 525iDEPS
Page 90: ...90 1744 004 22 03 2022 ...
Page 91: ...1744 004 22 03 2022 91 ...
