![background image](http://html.mh-extra.com/html/husqvarna/lf-160dl/lf-160dl_operators-manual_171265011.webp)
To stop the product
• Push the stop lever until the engine stops.
Maintenance
Introduction
WARNING:
Read and understand the
safety chapter before you do maintenance
on the product.
Maintenance schedule
* = General maintenance done by the operator. The
instructions are not given in this operator's manual.
X = The instructions are given in this operator's manual.
O = Refer to the engine manual for instructions.
General product maintenance
Before use, each
10 h
After the first 20
h
Weekly, each
100 h
After 6 months
or, each 250 h
Make sure that there are no fuel or oil
leaks.
*
Clean the product.
X
Make sure that nuts and screws are
tightened.
*
Examine the throttle control and
choke control for damage.
*
Make sure that the throttle control
and the choke control can move
smoothly.
*
Replace the oil for the eccentric ele-
ment.
X
X
Examine the vibration damping units
for damage.
X
Examine the tension of the V-belt
and look for damages. Adjust or re-
place the V-belt as necessary.
X
1742 - 002 - 04.02.2022
11