background image

 

English

 

 – 

 

3

 

KEY 

 

T

 

O SYMBOLS

 

Steps bef

 

ore using a new lawn 

mower

 

 

Please read the operator’s manual carefully.

Check that the cutting equipment is correctly fitted and 
adjusted. See instructions under the heading Assembly.

Fill with fuel and oil in the engine. See the instructions 
under the heading fuel handling.

Husqvarna AB has a policy of continuous product 
development and therefore reserves the right to modify the 
design and appearance of products without prior notice.

!

 

W

 

ARNING! Under no circumstances may the 

design of the machine be modified without 
the permission of the manufacturer. Always 
use genuine accessories. Non-authorized 
modifications and/or accessories can result 
in serious personal injury or the death of the 
operator or others.

!

 

W

 

ARNING! A lawn mower is a dangerous 

tool if used carelessly or incorrectly and can 
cause serious, even fatal injuries. It is 
extremely important that you read and 
understand the contents of this operator's 
manual.

!

 

W

 

ARNING! Long-term inhalation of the 

engine's exhaust fumes can represent a 
health hazard.

Summary of Contents for LC148VE





















Reviews: