Husqvarna J-handle set 335L X-series, Operator'S Manual

Page: 4 / 10

4 –
English
SAFETY INSTR UCTIONS
Cutting equipment
This section descr ibes how to choose and maintain your
cutting equipment in order to:
• Reduce the risk of kickback.
• Obtain maximum cutting performance.
• Extend the life of cutting equipment.
General rules
1 Only use cutting attachments with the guards we
recommend! See the chapter on Technical data.
2 Maintain the correct blade setting! Follow our instructions
and use the recommended blade setting tool. An
incorrectly set blade increases the risk of jamming and
kickback.
3 Check the cutting attachment for damage or cracks. A
damaged cutting attachment should always be replaced.
Sharpening grass cutter s and grass
blades
• See the cutting attachment packaging for correct
sharpening instructions. Sharpen blades and cutters
using a single-cut
fl at fi le.
• Sharpen all edges equally to maintain blade balance.
General w orking instructions
• Always carry out clearing and trimming at full throttle.
• Always slow the engine to idle speed after each working
operation. Long periods at full throttle without any load on
the engine (i.e. without the resistance that the cutting
attachment exerts on the engine when you are using the
machine) can lead to serious engine damage.
T erms
• Brush cutting is a general term for clearing grass. Grass
blades and grass cutters are used for this purpose.
• Grass trimming is a general term for light clearing, e.g.
around edges or around trees. A trimmer head or plastic
blades are used.
!
W ARNING! Using an incorrect cutting
attachment or an incorrectly sharpened
blade increases the risk of kickback.
!
W ARNING! Avoid cutting with the area of the
blade between the 12 o’clock and 3 o’clock
positions. Because of the speed of rotation
of the blade kickback can occur if you
attempt to cut thick stems with this area of
the blade.
!
W ARNING! Always discard a blade that is
bent, twisted, cracked, broken or damaged
in any other way. Never attempt to straighten
a twisted blade so that it can be reused. Only
use original blades of the speci
fi ed type.
!
W ARNING! Sometimes branches or grass
get caught between the guard and cutting
attachment. Always stop the engine before
cleaning.