background image

-- 13 --

STATEMENT OF WARRANTY

Husqvarna Outdoor Products provides war-

ranty to the initial purchaser for all products

that are sold by an authorised Husqvarna

Outdoor Products Dealer.

The warranty provides the purchaser with a

guarantee against faulty workmanship in

manufacture and/or defective components.

If any product supplied by Husqvarna Out-

door Products is found to be defective due

to faulty manufacture within the warranty

period, Husqvarna Outdoor Products

through its Authorised Servicing Dealers will

effect the repair or replacement at their dis-

cretion to the customer, free of charge pro-

viding:

S

The fault is reported directly to the Autho-

rised Servicing Dealer.

S

Proof of purchase is provided.

S

The fault is not caused by misuse, neglect

or faulty adjustment by the user.

S

The failure has not occurred through nor-

mal wear and tear.

S

The product has not been serviced, re-

paired or alterations made by any person

not authorised by Husqvarna Outdoor

Products.

S

The machine has not been used for hire.

Nothing contained in this warranty is in-

tended to purport to restrict, modify or ex-

clude the operation of any legislation in the

State where the product was pur-

chased.The following items are not covered

by this warranty:

S

Normal customer maintenance items

which become worn through normal regular

use, including, but not limited to, belts,

blades, blade adapters, globes, filters,

guide bars, lubricants, rewind springs, saw

chain, spark plugs, starter ropes, and tines;

S

Natural discolouration of material due to ul-

traviolet light;

S

Engine and drive systems not manufac-

tured by Husqvarna Outdoor Products,

these items are covered by the respective

original equipment manufacturers warran-

ty, all claims must be sent to the appropriate

manufacturer.

Product Warranty Period

Domestic

Commercial

Non--Powered Push Mowers

12 Months

90 Days

Electric and Petrol Walk--Behind Mowers

12 Months

90 Days

Electric and Petrol Chainsaws

12 Months

90 Days

Electric and Petrol Trimmers

12 Months

90 Days

Electric and Petrol Blowers

12 Months

90 Days

Petrol Ride--on Mowers

12 Months

90 Days

Summary of Contents for GBV 345

















Reviews: