Troubleshooting
The product does not start
• Make sure that the power supply and the power
cords are not damaged.
• Examine the machine stop button, turn the button
clockwise to release the machine stop button.
• Examine the error indicator. If the error indicator is
on, do 1 of these procedures:
• Let the motor become cool. The product can be
restarted when the temperature of the motor is
decreased.
• Adjust the power plug.
The product suddenly stops
• If the work load is too heavy for the product, the
overload protection engages and stops the motor.
• Decrease the load of the cutting blade.
• Let the motor become cool. The product can be
restarted when the temperature of the motor is
decreased.
The product stops during startup
Correct voltage supply is necessary for a good motor
performance. Too long extension cables or too weak
extension cables decrease the power of the motor
during operation.
• If the work load is too heavy for the motor, the error
indicator comes on. Wait until the error indicator
goes off and try again.
• Make sure that the extension cables are not too long
or too weak. Try to start the product again.
• If the product continues to stop during startup, speak
to an approved service workshop.
Transportation and storage
Transportation
• Remove the cutting blade before the transportation.
• This product is heavy. Be careful when you lift the
product, risk of injuries. Refer to
on page 59
.
• Obey special requirements for commercial
transportation.
• Safety the product during transportation. Make sure
that it cannot move.
To lift the product
WARNING: Make sure that the lifting
equipment has the correct dimension. The
rating plate on the product shows the
product weight.
WARNING: Make sure that the lifting eye is
not damaged.
WARNING: Do not walk or stay below or
near a lifted product.
• Use the lifting eye that is attached to the product
when you lift it.
• Use boots with steel toe-caps and non-slip soles.
Storage of the product
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Always keep the product indoors.
• Keep the product in a dry and frost free area.
1024 - 002 - 18.06.2019
59
