Husqvarna F2275V4, Owner'S Manual

Page: 56 / 162

12 SERVICE WORK ON THE CHASSIS
54
12.1 Raising the motorcycle with a lift stand
401942-01
Note
Danger of damage
The parked vehicle can roll away or fall
over.
–
Park the vehicle on a firm and level surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (81329955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
12.2 Removing the motorcycle from the lift stand
Note
Danger of damage
The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
401943-10
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
1
to the ground
with your foot and lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up
and secured with rubber strap.
12.3 Bleeding the fork legs
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 54)
402556-10
Main work
–
Release bleeder screws
1
.
Any excess pressure escapes from the interior of the
fork.
–
Tighten the bleeder screws.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 54)