Husqvarna F2201U1, Owner'S Manual

Page: 26 / 163

7 PREPARING FOR USE
24
–
Adjust the basic position of the hand brake lever. ( p. 86)
–
Adjust the basic position of the foot brake lever. ( p. 95)
–
Adjust the basic position of the shift lever. ( p. 124)
–
Get used to the handling characteristic of the motorcycle on suitable terrain before undertaking a more
challenging ride.
Info
This vehicle is not approved for use on public roads.
When offroad, it is recommended that you are accompanied by another person on another vehicle
so that you can help each other.
–
Also, ride as slowly as possible and in a standing position to get a better feel for the motorcycle.
–
Do not undertake any off-road trips that exceed your ability and experience.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
(FC 350 EU, FC 350 US)
–
Do not carry the luggage.
(FX 350)
–
If luggage is carried, ensure it is fixed firmly as close as possible to the center of the vehicle and ensure
even weight distribution between the front and rear wheels.
Info
Motorcycles react sensitively to any changes of weight distribution.
–
Do not exceed the maximum permissible weight and maximum permissible axle loads.
Guideline
Maximum permissible overall weight 335 kg (739 lb.)
Maximum permissible front axle load 145 kg (320 lb.)
Maximum permissible rear axle load 190 kg (419 lb.)
–
Run in the engine. ( p. 24)
7.2 Running in the engine
–
During the running-in phase, do not exceed the specified engine speed and engine performance.
Guideline
Maximum engine speed
During the first operating hour 7,000 rpm
Maximum engine performance
During the first 3 operating hours
≤
75 %
–
Avoid fully opening the throttle!