Husqvarna F2103V9, Owner'S Manual

Page: 125 / 169

COOLING SYSTEM 16
123
S04266-10
–
Push protection cap
3
upward over the coolant tempera-
ture sensor.
S04267-10
–
Unplug connector
4
.
–
Remove coolant temperature sensor
5
with the O-ring and
wait until the coolant escapes without bubbles.
–
Mount and tighten coolant temperature sensor
5
with the
O-ring.
Guideline
Screw, cylinder head
temperature sensor M10x1.25 12 Nm (8.9 lbf ft)
–
Plug in connector
4
.
–
Position protection cap
3
.
400243-10
–
Pour coolant in up to level
A
above the radiator fins.
Guideline
Coolant level
A
above the
radiator fins
10 mm (0.39 in)
Coolant ( p. 155)
S04268-10
–
Mount radiator cap
2
.
Danger
Danger of poisoning
Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the cooling system for leaks.
Finishing work
–
Check the coolant level. ( p. 119)