Husqvarna F2101U0, Owner'S Manual

Page: 103 / 137

TUNING THE ENGINE 15
101
15.1 Checking throttle cable play
400192-11
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Turn the
throttle grip back and forth slightly and determine the play in
throttle cable
A
.
Throttle cable play 2 … 3 mm (0.08 … 0.12 in)
» If the throttle cable play does not meet specifications:
–
Adjust throttle cable play. ( p. 101)
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and let it run at idle speed. Move the handle-
bar to and fro over the entire steering range.
The idle speed must not change.
» If the idle speed changes:
–
Adjust throttle cable play. ( p. 101)
15.2 Adjusting throttle cable play
Info
If the correct routing of the throttle cable has already been secured, the fuel tank does not need to be
removed.
Preparatory work
–
Turn the tap handle of the fuel tap to the OFF position.
–
Remove the air filter box cover. ( p. 59)
–
Remove the seat. ( p. 58)
–
Remove the right side cover. ( p. 63)
–
Remove the fuel tank. ( p. 64)
–
Check the throttle cable routing. ( p. 72)
S03442-10
Main work
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve
1
.
–
Ensure that the throttle cable sleeve is pushed all the way
into barrel adjuster
2
.
–
Loosen nut
3
.