1
2
b
4
3
a
Getting Ready to Sew
– 15
PLACING THE BOBBIN
Turn off the power switch
1.
Place the bobbin in the bobbin
case with the thread pulling off as
illustrated.
2.
Guide the thread into the front
notch (a) on the front side of the
bobbin case. Draw the thread to the
left, sliding it between the tension
spring blades.
3.
Continue to draw the thread lightly
until the thread slips into the side
notch (b).
4.
Pull out about 10 cm (4”) of thread.
Attach the bobbin cover. Check the
threading by referring to the chart
shown on the bobbin cover.
