background image

 

6

 

 – 

 

English

 

SAFETY INSTR

 

UCTIONS

 

Steps bef

 

ore using a new drilling 

machine

 

 

Do not use the drilling machine without first reading and 
understanding the contents of this Operator’s Manual.

This machine is designed for and intended for drilling 
concrete, brick and different stone materials. All other use 
is improper.

The machine is intended for use in industrial applications 
by experienced operators.

 

Al

 

ways use common sense

 

It is not possib

 

le to cover every conceivable situation you can 

face when using a drilling machine. Always exercise care and 
use your common sense. Avoid all situations which you 
consider to be beyond your capability. If you still feel uncertain 
about operating procedures after reading these instructions, 
you should consult an expert before continuing. Do not 
hesitate to contact your dealer or us if you have any more 
questions about the use of the drilling machine. We will 
willingly be of service and provide you with advice as well as 
help you to use your drilling machine both efficiently and 
safely.

Do not hesitate to contact your dealer if you have any more 
questions about the use of the machine. We will willingly be of 
service and provide you with advice as well as help you to use 
your machine both efficiently and safely.

Let your Husqvarna dealer check the drilling machine 
regularly and make essential adjustments and repairs.

Husqvarna Construction Products has a policy of continuous 
product development. Husqvarna reserves the right to modify 
the design and appearance of products without prior notice 
and without further obligation introduce design modifications.

All information and all data in the Operator’s Manual were 
applicable at the time the Operator’s Manual was sent to print.

 

P

 

ersonal protective equipment

 

 

Protective helmet

Hearing protection

Protective goggles or a visor

Breathing mask

Heavy-duty, firm grip gloves.

Tight-fitting, heavy-duty and comfortable clothing that 
permits full freedom of movement.

Boots with steel toe-caps and non-slip sole

Always have a first aid kit nearby.

!

 

W

 

ARNING! Under no circumstances may the 

design of the machine be modified without 
the permission of the manufacturer. Always 
use genuine accessories. Non-authorized 
modifications and/or accessories can result 
in serious personal injury or the death of the 
operator or others.

!

 

W

 

ARNING! You must use approved personal 

protective equipment whenever you use the 
machine. Personal protective equipment 
cannot eliminate the risk of injury but it will 
reduce the degree of injury if an accident 
does happen. Ask your dealer for help in 
choosing the right equipment.

Summary of Contents for DMS 180













Reviews: