Husqvarna DE 110i, Operator'S Manual, Page: 16 / 104

• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
• l'appareil ne doit pas produire de brouillage, et
• l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Suppliers Declaration of Conformity for Husqvarna DE
110i, DE 120 PACE
47 CFR § 2.1077 Compliance Information
Responsible Party
Husqvarna Construction Products North America, Inc.
17400 W 119th Street
Olathe, Kansas 66061
USA
U.S. Contact Information:Neil Stanford, Compliance
Manager, Telephone number: 913-928-1000
Operation
To do before you operate the product
Note:
The operation conditions are 800 m/2625 ft
maximum altitude, temperature between -10⁰C/14⁰F to
+40⁰C/104⁰F and humidity 85%.
Note:
Read the operator’s manual of the attached
equipment carefully. If specified requirements or settings
are given for the dust extractor, make sure that you obey
these.
1. Read the operator's manual carefully and make sure
that you understand the instructions.
2. Do the daily maintenance. Refer to Maintenance
schedule on page 19
.
3. Make sure that the work area is clean and bright.
4. Use personal protective equipment. Refer to
Personal protective equipment on page 14
.
5. Make sure that the product is installed correctly.
6. Make sure that the battery is fully charged.
To attach the dust extraction hose
WARNING:
Use an antistatic hose to
prevent antistatic effects.
1. Open the hose connector. (Fig. 12)
2. Put the hose adapter in the hose connector. (Fig. 13)
3. Push the hose adapter until you hear a click to get it
in correct position.
To remove the dust extraction hose
• Push the hose lock button (A) and pull the dust
extraction hose. (Fig. 14)
To attach and adjust the floor nozzle
1. Put the end of the handle fully into the shaft of the
floor nozzle. (Fig. 15)
2. Turn the knob (A) at the rear of the floor nozzle
to adjust the floor nozzle wheels. Different surfaces
and different types of dust and materials make it
necessary to adjust the wheels to get the best
performance. (Fig. 16)
Bluetooth
®
wireless technology
Products with built-in Bluetooth ® wireless technology
can connect to mobile devices and enables additional
functions from Husqvarna connect.
The symbol for
Bluetooth
®
wireless technology comes
on when your mobile device is connected to the product.
(Fig. 17)
To use embedded connectivity with
fleet
Note:
This part is applicable only for products
supplied with embedded connectivity.
Note:
Radio transmission by the Bluetooth
®
function
will be enabled on the first time of connection to a power
outlet, and stay on after that.
1. Download the Husqvarna Fleet Services iOS or
Android app Husqvarna Fleet Services.
2. Go to Husqvarna Fleet Services website https://
fleetservices.husqvarna.com for more information.
To connect the battery charger
1. Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2. Put the plug in a grounded socket outlet. The LED
on the battery charger flashes green one time.
Note:
The battery does not charge if the battery
temperature is more than 50 °C/122 °F. If the
temperature is more than 50 °C/122 °F, the battery
charger makes the battery become cool before the
battery charges.
16 1618 - 004 - 24.01.2022