Husqvarna CRT 36-25, Operator'S Manual

Page: 15 / 76

wc_si000377gb.fm
15
CRT 36 Safety Information

Reinstall the fuel tank cap after refueling.

Do not smoke.

Do not refuel a hot or running engine.

Do not refuel the engine near sparks or open flames.

Use suitable tools for refueling (for example, a fuel hose or funnel).

Do not refuel if the machine is positioned in a truck fitted with a plastic bed liner.
Static electricity can ignite the fuel or fuel vapors.
1.5 Service Safety
Service
training
Before servicing or maintaining the machine:

Read and understand the instructions contained in all manuals delivered with
the machine.

Familiarize yourself with the location and proper use of all controls and safety
devices.

Only trained personnel shall troubleshoot or repair problems occurring with the
machine.

Contact Wacker Neuson for additional training if necessary.
When servicing or maintaining this machine:

Do not allow improperly trained people to service or maintain the machine.
Personnel servicing or maintaining the machine must be familiar with the
associated potential risks and hazards.
Personal
Protective
Equipment
(PPE)
Wear the following Personal Protective Equipment (PPE) while servicing or
maintaining this machine:

Close-fitting work clothes that do not hinder movement

Safety glasses with side shields

Hearing protection

Safety-toed footwear
In addition, before servicing or maintaining the machine:

Tie back long hair.

Remove all jewelry (including rings).

Do not attempt to clean or service the machine while it is running. Rotating parts
can cause severe injury.

Do not crank a flooded engine with the spark plug removed on gasoline-
powered engines. Fuel trapped in the cylinder will squirt out the spark plug
opening.

Do not test for spark on gasoline-powered engines if the engine is flooded or the
smell of gasoline is present. A stray spark could ignite the fumes.

Do not use gasoline or other types of fuels or flammable solvents to clean parts,
especially in enclosed areas. Fumes from fuels and solvents can become
explosive.
WARNING A poorly maintained machine can become a safety hazard! In order for
the machine to operate safely and properly over a long period of time, periodic
maintenance and occasional repairs are necessary.